Directions for creating the BOOTABLE Starter Diskette for PS/1 Models 2123-081, 087, 131, 137, K37, N31, N81.

After extracting the archive into the 3 files:

README.TXT
LOADDSKF.EXE
2123STRT.DSK

you will need to take the following steps to create your 2123 Starter Diskette.

1)  Exit Windows (if you have it running) and go to the DOS prompt.
2)  Change to the directory where you have extracted the files.
3)  Place a blank 1.44MB (High Density) 3.5" diskette in your floppy drive.
4)  At the DOS prompt type the following command:

     LOADDSKF 2123STRT.DSK A:     <Enter>

  This will place the diskette image from the 2123STRT.DSK file onto the floppy.

5)  Follow the prompts until the system reports DISKETTE CREATED.
6)  Remove the floppy and place in a SAFE place for storage.

When you are ready to use the floppy, you will need to POWER OFF your PS/1 and insert the floppy in the diskette drive and POWER ON.

